Solution for Install Windows xp From USB Flash Drive

You might have installed  Windows  XP from  USB flash drive then you should face some problem because the Windows XP does not have the feature of booting from a USB flash drive. But you can still install windows XP from  USB flash drive. This becomes very useful if your CD/DVD ROM is not working properly.Tip: Fix USb problems

How to install Windows XP from USB flash drive

At first download the softwareWin to Flash direct link . It does not need the installation. After running the setup file the following screen will appear.

From Task tab you can choose your task.

After choosing task press next .

Select the source path of the windows installation disk or copy and then the path of your USB flash drive.

Now the exact bootable copy will be made in the USB Flash drive.
You can now install Windows XP from Flash drive. It is pretty easy method to install Windows XP from your Usb flash drive. If any problem arises then contact us. You can also manually build your USB flash drive enabled for installing XP in it. Any question or suggestion is always welcome.

Install Windows XP From USB Drive Part-II

I shall describe the process how to make the USB drive ready to install XP in your computer step by step.

Requirements:

1. At first you have to get a USB flash drive/disk(at least 1 GB).

2. XP_FROM_USB.rar from the given link below:

Download link

Update: You should have XP installed computer for this process.

The procedure

1. Extract the XP_FROM_USB.rar archive in a folder named Softslas(Say) in C: drive. Now navigate to C:SoftslasPeToUSB and double-click on the peToUSB.exe.

install-windows-xp-from-usb-drive-part-2-2

The appearing window will be like this:install-windows-xp-from-usb-drive-part-2-3

Set the following values:

select “USB Removable as Destination Drive”.
select “Enable Disk Format”.
select “Quick Format”.
select “Enable LBA (FAT 16x)”.

Finally, put XP-Softslas (or whatever you want) as Drive Label and click Start.

A message appears and click Yes.

Another message box will again appear and click Yes.

Immediate after that the USB disk will be formatted. Wait for few seconds and then click on “Ok” and “Close”.

3. Open the windows Command prompt by typing cmd at the Run box. The cmd.exe console appears.

Now type the following syntax and hit the Enter button from your keyboard.

cd c:softslasbootsect

Again, type the following command and press “Enter”.

bootsect /nt52 I:

Type “cd..” and press “Enter” and also type cd usb_prep8 and press Enter.

Now type usb_prep8 and press “Enter”.

4. Press any key to continue.

Now the command prompt window will look like this.

Prepares Windows XP LocalSource for Copy to USB-Drive:
0) Change Type of USB-Drive, currently [USB-stick]
1) Change XP Setup Source Path, currently []
2) Change Virtual TempDrive, currently [T:]
3) Change Target USB-Drive Letter, currently []
4) Make New Tempimage with XP LocalSource and Copy to USB-Drive
5) Use Existing Tempimage with XP LocalSource and Copy to USB-Drive
F) Change Log File – Simple OR Extended, currently [Simple]
Q) Quit
Enter your choice:_

Insert the XP installation CD in you CD/DVD ROM and in command prompt window, type 1 and press “Enter”. A “Browse For Folder” window will appear and here select the CD/DVD drive and then click OK.

Similarly, for the choice field enter 2 and if there assigned the letter “T” for your computer then change it otherwise do not alter it. After typing 2 in the choice option it will prompt
“Enter Available Virtual Drive Letter”.

Here, type a letter that is not any drive letter of your computer.

Let us say S is not a drive letter in your computer. So put S then press “Enter”.
Now it will get back to the Command prompt and then type 3 where it prompts for the choice. Then it will prompt “Please give Target USB-Drive Letter e.g type U”.

Now, put your USB drive letter and press “Enter”. Here, my USB drive label is “I” so I put “I”.

Again, input 4 and press Enter. It creates the new temporary image and makes a copy of it to the USB Flash Drive .
Please wait for a few seconds..

A warning message will appear like this:

“WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE T: WILL BE LOST! Proceed with Format (Y/N)?”

Type Y and press “Enter”.

Please wait………..

After completing Format it will prompt “Press any key to continue” and to continue hit any key .

Please wait………..

It will again prompt “Press any key to continue” and obviously press any key to continue.

5. Now a message box will appear showing

“Copy TempDrive Files to USB-Drive in about 15 minutes = Yes OR STOP = End Program = No”

Click “Yes”.

Now after this a message box will appear showing “Would you like USB-stick to be preferred Boot Drive U……………….”

Click “Yes”.

The next one asking “Would you like to unmount the Virtual Drive ?”

Click “Yes”.

Now wait some time and press any key…………….

Press any key again to close usb_prep8.

Now your USB you can Install Windows XP from the USB drive.

6. Insert your USB drive in the USB port and Reboot your computer. When starts the computer enter in the BIOS Setup and set the first boot preference as USB Hard Disk.Now Save and Exit from the BIOS Setup. Your computer will again restart and the following screen will appear.

Now Chose The TXT Mode Setup.After completing the partition, formatting and copying file the computer will restart again.

Now chose the GUI Mode Setup Option.

Wait for completing your installation.

I think this will help you to install XP from USB flash disk/drive especially in those computer without CD/DVD-ROM.